Aprs.fi Troubleshooting

Radioamatööriwikistä
Siirry navigaatioon Siirry hakuun

This is a section of the Aprs.fi user guide.

Troubleshooting

My position is not showing up on aprs.fi

If your APRS position is not showing up on the site, the most common problem is incorrect symbol setting in the tracker. Please check the raw packets to see the error messages (enter your callsign and click on Search). If you have a problem with the symbols, please check the APRS symbol configuration page on the APRS Wiki.

You should also check if your positions show up on other sites such as DB0ANF and findu.com. If the positions are not showing up on the other sites, the problem is most likely in your tracker's configuration or the local APRS network (or lack of it). Please get in touch with either another local APRS user, or your tracker's user group. Many of them are listed on the google group's front page.

If the positions are showing up on other sites but not aprs.fi, please check the raw packets again. aprs.fi is sometimes a little bit stricter than others about the packet syntax correctness, especially when it comes to symbol settings, and might reject a broken packet which others digest happily. Sorry about that.

My vehicle's position is jumping back and forth to old positions

This can happen due to many reasons, including:

  • Your tracker transmitting packets very often, increasing the chance that they arrive at aprs.fi in the wrong order
  • Your tracker transmitting packets with a very long digipeater path, increasing the chance that they arrive out-of-order
  • A dysfunctional digipeater buffering packets for a long time before retransmitting them
  • An igate with a bad Internet connection buffering packets before getting them on the APRS-IS
  • A broken digipeater or igate mangling the contents of packets, so that the duplicate packet looks a little bit different than the original and won't be detected by the duplicate detection algorithms

The first two are easy to fix. The second two are harder to track down, but their effects can sometimes be mitigated by reducing the transmitting rate and using a shorter path, so that the packets do not go to a faraway broken digipeater.

aprs.fi tries hard to filter old positions, but sometimes they still get through. Because APRS packets do not contain sequence numbers and usually do not contain timestamps, it's hard or impossible to properly catch the duplicates.

There is a long blog post describing issues with duplicate and delayed APRS packets on the aprs.fi blog.

The real-time map does not show

This application makes heavy use of Javascript and Cookies. Make sure your browser allows aprs.fi to use both. If it asked for permission to use these when you first arrived on the site, and you didn't allow it at that time, the selection was probably stored in your browser's configuration, and you'll need to go to the security preferences menu to change that.

The page layout looks funny or strange

At my workplace, there are sometimes problems with the web proxy server, and the CSS files defining the style and layout fail to load, resulting in a broken layout. This can be cured by doing a "power reload" by pressing CTRL and clicking the reload button (on IE). On Firefox, it's SHIFT-reload, and on Mac Firefox, you need to keep the Apple (Command) key down while clicking the reload button. Alternatively, you can try clearing the browser's cache (temporary files).

If this doesn't help, you're probably running Internet Explorer 6 or Internet Explorer 7. I strongly feel that IE6 must die, and everyone should upgrade to Internet Explorer 8 or whatever else. It's very much broken, and it takes an awful lot of time for me to make the site work with IE6. Others just work. Some layout and placement problems are still there and I can't make them go away, since IE6 is buggy. IE7 has some bugs left, too, and IE8 is OK.

If you're running a modern browser and still see layout problems (or any other problems), please let me know through the google group.

The real-time map is slow

The map is quite heavy for the browser, especially when a lot of symbol graphics and track lines are visible at the same time. This application is simply quite complicated and heavy for being "just a web page". It is very hard to make this run smoothly on a slow computer. The aprs.fi servers are quite fast and optimised for the task, and the slowness happens generally only due to the slowness of the browser's Javascript engine.

If possible, try out another browser. Google Chrome and Apple Safari have much faster Javascript engines than Internet Explorer and Firefox. New Internet Explorer versions (IE8 and later) are faster than the older ones (IE6, IE7).

The map is faster when there are fewer markers visible – just try zooming in a bit. In Preferences => Filtering you can hide some target types you're not interested in. Selecting Show with track instead of Track + waypoints will hide the small red dots indicating transmitted positions along the track, which will reduce the amount of markers and might give a considerable speed-up.