Ero sivun ”R58.en” versioiden välillä

Radioamatööriwikistä
Siirry navigaatioon Siirry hakuun
>Lakki
Ei muokkausyhteenvetoa
>Lakki
Rivi 8: Rivi 8:
The RX front-end DAC can be used for generating CTCSS waveform for TX. The modification is easy and requires just two components to be installed on the A8 audio board beneath the P8 processor board. All settings are adjusted by the handset.
The RX front-end DAC can be used for generating CTCSS waveform for TX. The modification is easy and requires just two components to be installed on the A8 audio board beneath the P8 processor board. All settings are adjusted by the handset.


 
[[Kuva:R58_RFC-CTCSS_A8N_juotospisteet.jpg]][[Kuva:R58_RFC-CTCSS_A8N_100n_10k.jpg]]
 
 


== CTCSS generation/encoding for R58 repeater ==
== CTCSS generation/encoding for R58 repeater ==

Versio 15. elokuuta 2006 kello 11.12

Nokia Mobira R58 and subversions RB58, RC58 and RD58

This page is intended to be a collection of modifications for R58 series radio, to be used for both operating radios and R58's used as repeaters, duplex gateways etc.


CTCSS generation/encoding for non-repeater usage

The RX front-end DAC can be used for generating CTCSS waveform for TX. The modification is easy and requires just two components to be installed on the A8 audio board beneath the P8 processor board. All settings are adjusted by the handset.

R58 RFC-CTCSS A8N juotospisteet.jpgR58 RFC-CTCSS A8N 100n 10k.jpg

CTCSS generation/encoding for R58 repeater

CTCSS decoder installation for R58 (both repeater and non-repeater usage)

General-purpose outputs

DTMF decoder installation for R58 (both repeater and non-repeater usage)

Wiring R58 for external controller usage (both repeater and simplex gateway usage)